ENTERPRISE BALER
Five Star Design, Performance and Reliability

12" TWO RAM BALER

Click on the pictures below to see a larger image.
1616


Click on the following underlined words to go directly to that section

Go to General Description
Go to Hydraulic Specifications & Features
Go to Specifications table
Go to bottom of the page


GENERAL DESCRIPTION Metric Specification = ( )
Length Overall (pump unit on side) 33'7" (1024 cm)
Width Overall (pump unit not incld.) 17'3" (526 cm)
Height at Control Station 8'0" (244 cm)
Height at Loading Hopper 8'1" (246 cm)
Charging Chamber 28"D x 60"W x 110"L (71 cm x 152 cm x 280 cm)
Loading Chute Opening 72" x 132" (183 cm x 335 cm)
Gross Weight w/o Pump Unit 77,000 lbs (35,000 Kg)
Gross Weight w/ Pump Unit 100 HP = 85,000 lbs
150 HP = 85,600 lbs
200 HP = 91,000 lbs		 (37,875 Kg)
(38,830 Kg)
(41,300 Kg)
Bale - Finish Size (approx.) 31" x 45" x 62" (79 cm x 114 cm x 158 cm)

Back to the top of the page

HYDRAULIC SPECIFICATIONS
Operating Hydraulic Pressure up to 3,500 PSI (max)
Gathering/Baling Ram Cyl Bore 12" (30.48 cm)
Gathering/Baling Ram Force (face) 240 PSI (1,654 kPa)
Total Gathering Ram Force 198 Tons (1,761 Kn)
Bale Ejector Cylinder Bore 12" (30.48 cm)
Bale Ejector Ram Force (face) 373 PSI (2,575 kPa)
Total Bale Ejector Ram Force 198 Tons (1,761 kN)
FEATURES Specifications Subject to Change Without Notice
A Gathering/Baling Ram
B Bale Ejection Ram
C Pumping Unit (air/oil heat exchanger - standard)
Reservoir
Oil Capacity
U.S. Gallon (liter)		 100 HP = 600 (2,270 L)
150 HP = 900 (3,400 L)
200 HP = 1.200 (4,540 L)
D Electrical Voltage
460V - 3 Phase - 60 Hz (standard)
(specials on request)
E Automatic Wire Tyer
Cranston 12 ga. thru 8 ga. round or
other brands as per customer request
F Main Power Panel
G Enlarged Baler Loading Hopper
H Shear Knives
I Operators Control Panel - standard location
(optional locations available)
J Progamable Processor Controller
K Options - Bale Separation Door, Oversize Eject Cyl., Special Bale Size

Go back to the top of the page

MATERIALBALE DENSITY
LB/CU/FT
(Kg/M3)		BALE WEIGHT
LBS
(Kg)		WIRES
PER
BALE		PRODUCTION RATE - TONS PER HOUR
US STD. (METRIC)
100 HP 150 HP 200 HP
Fiber OCC 25-29 1,250-1,450 4 8-13 12-18 16-24
(400-465) (567-658) - (7-12) (11-16) (14-22)
Hi Grades 26-31 1,300-1,550 4 10-15 13-20 18-30
(417-497) (590-703) - (9-14) (12-18) (16-27)
News/Mix 26-30 1,300-1,500 4 12-18 16-25 25-35
(471-481) (590-680) - (11-16) (15-23) (22-32)
Ferrous
Metals		 Tin Cans 26-30 1,300-1,500 5 4-6 6-8 8-10
(417-481) (590-680) - (3-5) (5-7) (7-9)
Tin Siding 36-80 1,700-4,000 4 - - -
(577-1,282) (771-1,814) - - - -
Non-
Ferrous
Metals		 Alum. Can 19-22 950-1,100 5 3-5 4-7 6-8
(304-352) (431-499) - (2-5) (3-6) (5-7)
Alum. Siding 26-36 1,300-1,800 4 4-6 5-7 7-9
(417-578) (590-818) - (3-5) (4-6) (6-8)
Alum. Insul. Wire 32-37 1,600-1,850 6 3-5 4-7 6-10
(514-594) (727-841) - (2-4) (3-6) (5-9)
Copper Tube 48-60 2,400-3,000 6 6-9 8-13 11-17
(769-961) (1,089-1,361) - (5-8) (7-12) (10-15)
Copper Insul. Wire 50-80 2,500-4,000 6 7-12 10-18 14-25
(801-1,282) (1,134-1,814) - (6-11) (9-16) (13-23)
Copper Wire Strip 60-100 3,000-5,000 6 17-27 22-35 30-45
(963-1,605) (1,364-2,273) - (15-24) (20-32) (27-41)
Stainless Sheet 44-86 2,200-4,300 4 6-10 9-14 12-18
(706-1,380) (1,000-1,995) - (5-9) (8-13) (11-16)
Stainless Mix Pkg. 48-76 2,400-3,800 4-6 4-8 7-12 10-16
(770-1,220) (1,091-1,727) - (3-7) (6-11) (9-15)
Plastic Film 18-24 900-1,200 10-15 - - -
(289-385) (409-545) - - - -
HDPE 22-26 1,100-1,300 10-15 1-2 2-3 3-4
(352-417) (499-590) - (1-2) (2-3) (2-3.5)
Pet 18-24 900-1,200 10-15 1-2 2-3 3-4
(289-385) (409-545) - (1-2) (2-3) (2-3.5)
Solid Waste 36-46 1,800-2,300 6 18-24 23-28 28-35
(577-737) (816-1,043) - (16-22) (21-25) (25-32)


Go back to the top of the page


BackHomeEmail



Click here for further information.




All contents copyright ©2009 Enterprise Company. All right reserved.