ENTERPRISE BALER
Five Star Design, Performance and Reliability

SINGLE RAM HORIZONTAL BALER


Click on the pictures below to see a larger image.
Horizontal BalerHorizontal Baler



EACH SYSTEM INCLUDES:
  • Infeed Pit Conveyor
  • Inclined Conveyor
  • Powered Floating Feeder
  • Fluffer
  • Horizontal Baler
  • Water Spray System
  • Programmable Solid State Controls
  • Automatic Wire Tying
  • Bale Discharge Slide Ramp
  • Bale Length Dial Selector
  • Pre Compression Press


The hydraulically operated compacting press allows the baling chamber to fill to optimum capacity prior to the main cylinder compression stroke. The Enterprise pre-press system eliminates the shear point and the tremendous downward forces on the baler floor generated by the compaction ram because of the shear point.

The Pre-Compression Press
  • Increases Baler Longevity
  • Reduces Maintenance and Repair Costs

    • The Pre-Compression Press reduces electrical motor horsepower requirements, which means you'll see lower operating cost!

    SPECIFICATIONS:
    OVER ALL LENGTH 33'6"
    OVER ALL HEIGHT 2'0"
    OVER ALL WIDTH WITHOUT WIRE TYER 7'6"
    OVER ALL WIDTH WITH WIRE TYER 14'0"
    BALE CHAMBER SIZE 44"X42"
    BALE SIZE -- NOMINAL 44"X42"
    (VARIABLE TO 100" LONG)
    CHARGING CHAMBER OPENING 44"X80"
    MAIN CYLINDER 10" DIA. X 112" STROKE
    (EXERTS 215,000 LBS. PUSH)
    PRE-COMPRESSION PRESS PRESSURE 110,000 LBS. PUSH
    RESTRICTOR CYLINDER 9" DIA. X 6" STROKE
    PUMPING UNIT (W/REGENERATING CIRCUIT) 100 HP W/500 GAL. CAPACITY
    CYCLE TIME 20 SECONDS
    CAPACITY 35 TO 60 TONS PER HOUR
    APPROXIMATE BALE WEIGHT 1800-2500 LBS.
    WEIGHT 34 TONS


    AUTO WIRE TYER IS A FIVE (5) WIRE DESIGN. UNIT IS CONTROLLED BY PROGRAMABLE ELECTRICAL CONTROLS. BALE CHAMBER IS LINED WITH REPLACEABLE AR400 AND AR500 PLATE.

    BackHomeEmail




    Click here for further information.


    Send comments to: webmaster@enterpriseco.com

    All contents copyright ©2007 Enterprise Company. All right reserved.