ENTERPRISE COMPANY

ALLIGATOR SHEARS
FOR MOST PURPOSES

Click on the the underlined words below to see a list of features or a model comparison chart.

Go to Models Table
Go to Features Information
Go to bottom of the page


Click on the pictures or words below for further information on an individual model.
ENTERPRISE COMPANYENTERPRISE COMPANYENTERPRISE COMPANY
Model 200 | Model 350 | Model 400








STANDARD FEATURESOPTIONAL FEATURES
  • Sealed taper roller bearings.
  • Adjustable stroke control on manual or automatic cycling.
  • Shear travel may be stopped or reversed at any time of cycle.
  • Automatic return at end of cut cycle on manual control.
  • Blades have four cutting edges that are serrated, same as having 3 spare blades.
  • Built to operate indoors or outdoors.
  • Competitively priced. 25% more cutting capacity than most comparative model.
  • Requires no foundation or air compressor.
  • Channel base for easy movement by fork lift.
  • Machine cannot be damaged by exceeding maximum capacity.
  • Comes with foot control as standard equipment.
  • 230/460 V. 3 phase, 60 cycle.
  • Point of operation guard.
  • Oil reservior heater.
  • 4-position permanent or detachable mechanical rebar holdown for rebar cutting. All models except 400.
  • Notched blades for cutting round stock in preparation for threading -- will not deform material.
  • Power holddown on model 200 thru 400 series.
  • Gasoline engine for remote area operation.
  • Special voltages.


Go back to the top of the page




Model Features
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
+60,000 PSI Steel and Intermediate Grade rebar
Shear Model #100125200250300350400
Capacity Rounds+ 1" 1.25" 2" 2.5" 3" 3.5" 4"
Capacity Flats+ 0.5" x 3.5" 0.5" x 6" 0.75" x 8" 0.75" x 10" 1" x 10" 2" x 11" 4" x 6"
Capacity Reinforcing+ 1-#8
5-#4		 1-#11
2-#8
4-#5		 1-#14
2-#11
4-#8		 1-#18
3-#11
5-#9		 1-#18
2-#14
4-#11		 - -
Blade Force, Tons 25 40 80 140 180 292 318
Blade Length 8", 10" 10" 16" 18", 24" 12", 18"
24" x 36"		 18", 36" 30", 36"
Motor Size 3 5 10 15 20 50 100
Shipping Wt. Approx. 750 lbs. 1300 lbs. 2300 lbs. 4700 lbs. 6000 to
7400 lbs		 12,500 to
13,500 lbs.		 25,000 lbs
Floor Space 28" x 33" 36" x 46" 36" x 54" 48" x 60"
48" x 66"		 48" x 66"
48" x 72"
48" x 78"
48" x 90"		 64" x 68"
72" x 86"		 8' x 12'
8' x 12'
Stoke Cycles 15 - 40 12 - 60 15 - 50 15 - 40 11 - 40 10 - 35 -
Jaw Opening Tip 4" 5" 10" 12" 8" - 10" - 13" 12" - 21" 19" - 22"
Jaw Opening Throat 0.75" 1.25" 2" 2.5" 3" 3.5" 4"

Go back to the top of the page


BackHomeEmail


Please visit us again soon!
Information added on an on-going basis.


Click here for further information.


Send comments to: webmaster@enterpriseco.com

All contents copyright ©2007 Enterprise Company. All right reserved.